Nisshinbo Launched RIOT-002 the Second Generation of the Environment Sensing Board, for Use in IoT Verification Experiments
The RIOT-002 is an environment sensing board that can send sensor data of temperature, humidity, atmospherIC pressure, illuminance, and 3-axis acceleration to tablets and other devices via Bluetooth Low Energy (BLE).
Equipped with our power management ICs for energy harvesters, ultra-low current consumption ICs and a real-time clock IC, this board achieves independent power generation and prolongation of battery operating time, all of which IoT edge devices require. It makes it easy to develop new IoT edge devices, contributes to shortening the construction period of those devices, and is applicable to environment data loggers, electronic shelf tags, etc.
Features
1. Charging from Photovoltaic Panel to Secondary Battery
The R1801, a buck DC/DC switching regulator for energy harvesters, is used to extract power from a photovoltaic panel (not included) and charge the secondary battery. The internal maximum power point control (MPPC) function enables the R1801 to configure its MPPC voltage at which the photovoltaic panel you use can produce its maximum power.
2. High-efficiency Operation
Since the MCU, BLE, and sensors are operated by using the RP605, an ultra-low current consumption buck-boost DC/DC switching regulator with the battery monitor, and the RP118, an ultra-low current consumption LDO, both standby and active operation can be performed with high efficiency. The average operating current (at 5-second intervals of BLE transmission) is 22 µA.
3. Dedicated Application
The RIOT-002 series includes our dedicated application for Android. Using the dedicated application enables the RIOT-002 to collect and monitor various environmental data. The application can also be used to set operating hours, the transmission intervals of environment data, etc.
Improvements over RIOT-001
· Expansion of use situations thanks to an on-board 3-axis acceleration sensor
· Available for several types of small batteries (refer to the specifications for details)
· Improvement of our dedicated application for Android (e.g., setting of operating hours, data transmission interval, etc.)
· Optimization of power management ICs
· Energy saving by time management using RTC
RIOT-002 Series Block Diagram
Example of Applications
ICs Equipped with Environment Sensing Board RIOT-002
R1801 Series, Low Power Consumption (IQ 200nA) Buck DC/DC Converter for Energy Harvester
RP605 Series, Low Power Consumption 300mA Buck-Boost DC/DC Converter with Battery Monitor
RP118 Series, Low Supply Current (IQ 200nA) 100mA LDO Regulator
R2221 Series, Low supply current, 2-wire (I2C Bus) Serial Interface, High-accuracy Real Time Clock (RTC)
- |
- +1 赞 0
- 收藏
- 评论 0
本文由翊翊所思转载自NISSHINBO News,原文标题为:New Product: RIOT-002 Series, 2nd Generation of Environment Sensing Board, Data Acquisition of Temperature, Humidity, Atmospheric Pressure, Illuminanc,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关研发服务和供应服务
相关推荐
Nisshinbo Launched Development of First MUSES-Series High-sound-quality Power Management IC
Nisshinbo Micro Devices Inc. is pleased to announce the launch of the development of the first MUSES-series high-sound-quality power management IC.
【产品】R5642系列锂电池二次保护IC,关断最大电流仅0.1μA,适用1-3节锂电池
Nisshinbo推出的R5642是可充电锂离子/锂聚合物电池用的过充保护IC。可检测1-3节锂电池的过充。R5642锂电池二次保护IC,内置高精度的电压检测功能以及关断功能,所有电压都比关断检测电压低时,通过停止所有电路来减低消费电流。
【IC】输出电压1.5~5V的单节锂电池保护IC R5619系列,可高精度检测过充放电电流
R5619系列是一款单节锂电池保护IC,可以检测过充电、过放电电流。过充过放电流检测精度高达±1.00mV。通过过电流检测的低电压和高精度,可以实现降低感测电阻,降低基板的发热。通过低耗电流和低待机电流实现小容量电池也可达到更长的续航时间。
R5460N5xxXX Series Two-cell Li-ion Battery Protection IC
型号- R5460N549AJ,R5460N5XXXX SERIES,R5460N,R5460N5XXXX,R5460N514AF,R5460N537AF,R5460N525AF,R5460N536AF,R5460N546AJ,R5460N512AF,R5460N5XX$*-TR-FF,R5460N534AF,R5460N548AJ,R5460N507AF,R5460N518AF,R5460N508AF,R5460N528AF,R5460N538AF,R5460N547AG
R5480K Series 1-Cell Li-Ion Battery Protection IC
型号- R5480K228CL,R5480K267CL,R5480K228CG,R5480K266CL,R5480K287CL,R5480K286CL,R5480K285CL,R5480K SERIES,R5480K247CG,R5480K261CL,R5480K284CL,R5480K262CL,R5480K283CL,R5480K241CG,R5480K240CG,R5480K260CL,R5480K354CL,R5480K355CL,R5480K257CL,R5480K278CL,R5480K277CL,R5480K275CL,R5480K342UM,R5480KXXX$∗-TR,R5480K602CQ,R5480K603CP,R5480K,R5480K604CR,R5480K326CL,R5480K349CL,R5480K601CN,R5480K348CL,R5480K324CL
RN5T569 Series AEC-Q100 Grade 2 Programmable Power Management IC for Automotive Applications
型号- RN5T569XX-E4-#E,RN5T569 SERIES,RN5T569
RIOT-001 Environment Sensing Board
型号- R1800,RP604,RP604K201B,MAX44009,RY7011A,RIOT-001,RP124L123B,RP124,BME280,SLB03070LR35,R1800K022A
NJU9102/NJU9102A Digital Earth Leakage Current Detector IC Ground Fault Current Detect IC
型号- NJU9102A,NJU9102/AM,NJU9102
R5438L Series 1 to 3 Cells Li-Ion Battery Protection IC for Secondary Protection
型号- R5438L,R5438L305AA,R5438L317BA,R5438L327AA,R5438L303AA,R5438L304AA,R5438L306CA,R5438LXXXXA,R5438L SERIES,R5438L303BA,R5438L312AA,R5438L326DA,R5438L330AA,R5438L301BA,R5438L322BA,R5438L329BA,R5438L328BA,R5438L304BA,R5438L315AA,R5438L305BA,R5438L308BA,R5438L301AA,R5438L312BA,R5438L331BA,R5438L332BA,R5438LXXX$∗-TR
R5541K Series Low ON Resistance Nch Load Switch IC
型号- R5541K001B,R5541K001D,R5541K SERIES,R5541K001*-E2,R5541K001X,R5541K
R5527K SERIES 3A Load Switch IC
型号- R5527K001X,R5527K002X,R5527K00∗∗-TR,R5527K,R5527K00XB,R5527K00XD,R5527K SERIES,R5527K001B,R5527K001A,R5527K002B,R5527K001D,R5527K001C,R5527K002D
RN5T569 Series AEC-Q100 Compliant Programmable Power Management IC for Automotive Applications
型号- RN5T569XX-E4-#E,RN5T569 SERIES,RN5T569
【产品】日清纺推出18mΩ导通电阻、3A输出电流的R5543系列负载开关IC,用于光通信模块、智能手机等
R5543系列开关IC是基于CMOS的双电源电压负载开关IC,用于从次级电源向负载电路供电。R5543系列开关IC内置N通道晶体管,导通电阻典型值为18mΩ ,使其能够提供较低的压降电压,并在关断模式下防止反向电流。
电子商城
现货市场
服务
可烧录MCU/MPU,EPROM,EEPROM,FLASH,Nand Flash, PLD/CPLD,SD Card,TF Card, CF Card,eMMC Card,eMMC,MoviNand, OneNand等各类型IC,IC封装:DIP/SDIP/SOP/MSOP/QSOP/SSOP/TSOP/TSSOP/PLCC/QFP/QFN/MLP/MLF/BGA/CSP/SOT/DFN.
最小起订量: 1 提交需求>
可加工2-32层PCB/1-5阶HDI/FPC柔性线路板/Rigid-Flex Board软硬结合板,最小线宽线距:2mil;最小孔:3mil;铜厚:1-10OZ。
最小起订量: 1 提交需求>
登录 | 立即注册
提交评论