A Comprehensive Introduction to NVMe Solid State Drive Form Factors
Introduced 10 years ago, the NVMe specifications took NAND flash storage to unprecedented levels of speed and performance, with 6X the throughput and 7X lower latency than Serial ATA 6 Gbps (also commonly known as SATA III). Storage devices supporting the NVMe protocol connect to the host system using the PCI Express (PCIe) bus, leveraging its excellent features for scalability, low latency and fast performance.
NAND flash storage supporting the NVMe protocol comes in several form factors using different interfaces, which we will discuss in this article.
M.2 Cards/Modules
M.2 (pronounced M-dot-two) is a specification for internal expansion cards. It was formerly known as the Next Generation Form Factor (NGFF) and was created as a successor of the mSATA standard.
This specification allows flexible physical forms. Modules can come in different widths and lengths, with connectors supporting both legacy SATA interface (via AHCI) and PCIe interface (via NVMe). To ensure compatibility with the host system, M.2 card connectors are uniquely keyed depending on the card’s purposes or capabilities.
ATP's NVMe-based M.2 solid state drives come in three forms:
· M.2 2280. Each module measures 22 mm wide and 80 mm long, and comes in double-sided configuration, which means that components are installed on both top and bottom sides of the module.
The following table compares the physical appearance and key specifications of ATP’s NVMe-based M.2 2280 SSDs.
Table 1. ATP M.2 2280 NVMe SSD Specifications
· M.2 Type 1620 HSBGA. Heatsink ball grid array (HSBGA) SSDs are ATP’s tiniest flash storage solutions supporting the NVMe protocol. As soldered-down solutions, they are secure in place even during constant vibrations and rigorous operations. The HSBGA measures 16 (L) x 20 (W) x 1.6 (H) mm) and use high-speed PCIe 3.0 interface x4 lanes and NVMe protocol to deliver up to 32 Gb/s bandwidth at 8 Gb/s per lane.
Table 2. ATP NVMe M.2 HSBGA SSD Specifications
· 2.5” U.2
SSDs with the U.2 (pronounced U-dot-two) connector support the PCIe interface via the NVMe protocol. Formerly known as SFF-8639, U.2 uses a total of four PCIe lanes for a maximum theoretical bandwidth of up to 32 Gbps. ATP’s NVMe U.2 SSDs are similarly sized as 2.5” SATA SSDs. They are designed with aluminum housing for better heat dissipation.
The following figure compares the physical appearance of the 2.5” with U.2 SSDs and shows the U.2 connector.
Figure 1. From left: 2.5” SATA SSD, U.2 SSD and U.2 connector
EDSFF
The Enterprise and Datacenter SSD Form Factor (EDSFF) family of specifications was developed by a group of 15 companies to meet the increasing data generation and consumption requirements of data center storage. EDSFF SSDs come in different form factors but share the same NVMe protocol, PCIe interface, edge connector, and pinout and functions.
EDSFF form factors are listed below. Each form factor has different variants.
· E1.L (EDSFF 1U Long). It was inspired by Intel's "ruler" form factor, which offered capacities that were unavailable from other SSD configurations. It is designed for high-capacity and dense storage use cases. As its name implies, E.1L was “developed to maximize capacity per drive and per rack unit in a 1U server or storage array.”
· E1.S (EDSFF 1U Short). The E1.2 is more like the M.2 and U.2 – small and compact, just a bit longer to accommodate more flash memory. It is also hot-pluggable, unlike the M.2.
· EDSFF E3.L and E.3S. These form factors are optimized for 2U servers and are similar to 2.5” SSDs. The E3 connector can support up to x16 PCIe lanes, while most SSDs today support up to x4 lanes.
Conclusion
The NVMe protocol has enabled NAND flash storage devices to break the barriers of SATA. As the world continues to generate more data, ATP takes advantage of technological advances to make sure that your data is stored safely, accessed speedily, and transformed into actionable insight when needed.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Batman转载自ATP,原文标题为:Introduction to NVMe Solid State Drive Form Factors,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
【技术】ATP利用MCU为SATA和NVMe SSD提供智能电源管理和PLP功能
ATP PowerProtector 4集成了基于MCU的设计,可为ATP的下一代SATA和NVMe SSD提供增强的电源管理和PLP功能。通过结合硬件和固件解决方案,基于MCU的设计可保护数据以及存储设备,以实现更高水平的完整性和可靠性。
新技术 发布时间 : 2020-07-08
【技术】NVMe-MI协议解读——完整的NVMe SSD管理方式
Nvme-MI(Management Interface),定义了一套完整的NVMe SSD管理方式,独立于NVMe协议且为NVMe SSD服务。与NVMe协议不同,NVMe-MI协议是通过MCTP协议进行传输,同时底层物理层支持PCIe或者SMBus/I2C,本文后续默认物理层都是SMBus/I2C。
新技术 发布时间 : 2021-05-24
【技术】Dapustor的Haishen系列NVMe SSD 支持4种带外管理机制,可在BMC服务器上完美显示
当前NVMe SSD的带外管理总共有4种机制,Dapustor的Haishen 系列NVMe SSD对于前述4种带外管理机制已经全部支持,能在各大服务器厂商的BMC服务器上完美显示。
新技术 发布时间 : 2021-05-23
PCIe® Gen 3 NVMe M.2 2280 / 2242 / 2230 SSD The Global Leader in Specialized Storage and Memory Solutions
型号- FT960GP38AG8BPC,N750PI,FT480GP38ANDBFC,FT120GP38AG8BPC,FT480GP38AG8BPC,FT480GP34ANDBFC,FT960GP38AG8BPI,FT240GP38AG8BPC,FT120GP38ANDBFC,N700PC,FT240GP38AG8BPI,FT120GP38AG8BPI,N600SC,N650SI,N600VI,FT960GP34ANDBFC,N700PI,FT240GP38ANDBFC,N600SI,FT120GP34ANDBFC,N650SC,FT240GP34ANDBFC,N600VC,FT480GP38AG8BPI
ATP(华腾国际)DRAM存储模块和NAND闪存产品选型指南(英文)
目录- Company Profile Segment Challenges and Solutions Thermal Solutions Endurance Solutions Security Solutions CFexpress & USB 3.0 Value Line SSDs DDR5 DRAM SOLUTIONS FLASH SOLUTIONS Flash Products Naming Rule Solutions & Technologies Flash Technology Overview table Complete Flash Spec Overview & Product Dimensions
型号- A750PI,E650SC SERIES,S600SC,B800PI,S750 SERIES,S600SI,S600SCA,E750PC SERIES,B600SC,N700PC,S700SC,E650SC,A750 SERIES,E600VC,S800PI,A750PI SERIES,I800PI,A600VC,A650SI,A650SC,N700 SERIES,S650SI,N750,N750PI,A800PI,A700PI,N700SI,N650 SERIES,E600SAA,N700SC,A750,N600SC,A600VC SERIES,E600SA,E650SI,E650SI SERIES,N750 SERIES,E700PIA,TR-03153,N600SI,S650,S650SC,E700PAA,N650SIA,E600SI,B600SC SERIES,S750SC,S600SIA,I700SC,N650SI,N600VI,E600SIA,E750PI,N650SC,N750PI SERIES,N600VC,I600SC,E750PC,S700PI,A650 SERIES,N650,N600 SERIES,N600VC SERIES,S650 SERIES,A650,AES-256,E700PI,A600SI,E750PI SERIES,N700PI,E700PA,S750,S750PI,E700PC,A600SC
ATP Unveils Industry’s Highest-Endurance Industrial SSD with 125℃ Operating Temperature Range
ATP Electronics proudly announces the launch of the N751Pi PCIe®Gen4 NVMe M.2 2280 SSDs, which set a new industry standard with unmatched endurance among industrial solid state drives (SSDs) configured with pseudo single-level cell (pSLC) NAND.
产品 发布时间 : 2024-08-24
ATP Launches Its Tiniest PCIe Gen3 x4 NVMe™ SSDs in M.2 Type 1620 HSBGA Package
ATP Electronics, the global leader in specialized storage and memory solutions, has announced the launch of its tiniest NVMe flash storage offering: the N700 Series PCIe® Gen3 x4 NVMe™ solid state drives (SSDs, which are available as M.2 Type 1620 heatsink ball-grid array (HSBGA) package.
新产品 发布时间 : 2021-05-09
ATP‘s Power Loss Protection Just Got Smarter with MCU-based SSD Design
ATP customers want constant assurance that power loss events will not cause massive downtime or lost data that could affect business operations and lead to higher operating costs. The MCU intelligently monitors sudden power failure conditions from a glitch to a surge or a complete outage...
原厂动态 发布时间 : 2023-10-30
ATP(华腾国际)固态硬盘选型指南
描述- Since 1991, we have consistently distinguished ourselves as one of the world’s leading original equipment manufacturers (OEM) of high-performance, high-quality and high-endurance NAND flash products and DRAM modules.
型号- A750PI,S600SC,B800PI,S750 SERIES,S600SI,B600SC,N700PC,A750 SERIES,E650SC,N601,N651SI,A600VI,S800PI,E600VC,I800PI,A600VC,A650SI,A650SC,N651SC,N750,S650SI,A600VI SERIES,N750PI,N651SIE,A800PI,N601 SERIES,A700PI,N651SIA,N650 SERIES,E600SAA,A750,A600VC SERIES,N600SC,E600SA,E650SI,N750 SERIES,E700PIA,N600SI,S650,S650SC,N651SI SERIES,E700PAA,B600SC SERIES,E600SI,N600VI SERIES,I700SC,N600VI,N650SI,E600SIA,N650SC,E750PI,N600VC,I600SC,E750PC,N651,S700PI,A650 SERIES,N650,N751PI,S700PC,N600VC SERIES,N651 SERIES,S650 SERIES,A650,N601SC,S750PC,E700PI,A600SI,N700PI,E700PA,S750,S750PI,E700PC,N651SCE,A600SC
PCIe® Gen 3 NVMe M.2 2280 / 2242 / 2230 SSD PRODUCT FLYER
型号- AF120GSTJA-8BAXX,AF240GSTJA-8BAXX,AF1T92STJA-8BAXX,AF960GSTJA-8BAXX,AF120GSTJA-8BCXP,AF120GSTJA-8BAXP,N600V,AF960GSTJA-8BAXP,AF480GSTJA-8BAXX,AF960GSTJA-8BCXP,N650SI,N600VI,AF120GSTJA-8BCIP,N650SC,AF960GSTJA-8BCIP,N600VC,AF480GSTJA-8BCIP,AF480GSTJA-DBCXX,N750PI,AF960GSTJC-DBBXX,AF240GSTJA-DBCXX,N700SI,AF120GSTJA-DBCXX,AF240GSTJA-8BCIP,N700SC,AF480GSTJC-DBBXX,N600SC,AF480GSTJA-8BAXP,N700PI,AF480GSTJA-8BCXP,N600SI,AF240GSTJA-8BCXP,AF240GSTJC-DBBXX,AF240GSTJA-8BAXP,AF1T92STJA-8BAXP,AF120GSTJC-DBBXX
NVMe SSD Thermal Management: What We Have Learned from Marathons
NVMe solid state drives (SSDs) are known to run at blistering speeds. They are 4X faster than Serial ATA (SATA) drives! As such, they are prone to overheating, especially when installed in systems with limited airflow. This series of articles explores the considerations and thermal solutions offered by ATP, so NVMe SSDs can beat the heat and thus deliver reliable sustained performance over extended periods of time.
设计经验 发布时间 : 2024-05-24
M.2 2280 PSLC NVMe SSDs Break 3D TLC Limits wth 2000 MB/s Sustained Sequential Write Performance
ATP ELECTRONICS introduces its latest line of M.2 2280 NVMe solid state drives (SSDs) built on 3D triple level cell (TLC) NAND flash.
新产品 发布时间 : 2022-03-25
PCIe® Gen 3 NVMe M.2 Type 1620 HSBGA SSD The Global Leader in Specialized Storage and Memory Solutions
型号- N600VI,N700PI,N700PC,N600VC,N700,N700 SERIES
ATP NVMe Solutions Built for the Fast Lane, Sequential Read Speed of up to 2,540 MB/s, and Sequential Write Speeds up 1,100 MB/s
ATP Electronics responds to the clamor for acceleration in enterprise and mission-critical environments with its NVMe-based M.2 2280 SSDs. Designed for a PCIe 3.0 x4 interface and complying with NVMe 1.2 specifications, ATP NVMe SSDs boast up to 1 TB memory capacity, sequential read speed of up to 2,540 MB/s, and sequential write speeds up 1,100 MB/s. ATP NVMe solutions also integrate 3D NAND MLC technology, enabling higher memory capacity, lower cost per bit, and increased longevity.
原厂动态 发布时间 : 2023-10-25
电子商城
服务
可定制ATP TE Cooler的冷却功率:40~200W;运行电压:12/24/48V(DC);控温精度:≤±0.1℃; 尺寸:冷面:20*20~500*300;热面:60*60~540*400 (长*宽;单位mm)。
最小起订量: 1 提交需求>
登录 | 立即注册
提交评论