Cell to Chassis – (CTC) Space- and Weight-Saving Solutions and Fast Acceleration

时间： 2022-12-23 来源：Diotec News

技术问答

Interesting facts: E-Motors don't need any plungers or crankshafts and are able accelerate to 100km/h in very few seconds. (Some extremely powerful e-cars reach the 100km/h in less than 2(!) seconds.) Even at low speeds, e-motors deliver the maximum torque immediately after the start - A great advantage compared to combustion engines that need a certain number of revolutions per minute. Moreover, an e-car drives almost silently and runs without harmful emissions – when charged by solar, wind or other renewable energies.

As car batteries normally are quite heavy, it is advantageous to implement them directly in the chassis – without a separate box. This reduces the overall weight of the car and saves space at the same time. Since the batteries are no more centralized but distributed all over the chassis, there will be separate battery disconnection units (BDUs). Those are operated on the still present 12V board supply and need – like all electronics on that voltage level – diodes providing reverse battery polarity protection.

A typical device for that purpose is the SK14-AQ Schottky Diodes, assembled in the standard DO-214AC/SMA case outline. The part is fully AEC-Q101 qualified and offers nominal 1A/40V, which allows to cover a wide range of automotive electronics consuming few 100mA of current – like the BDUs used for Cell to Chassis batteries.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由Devor转载自Diotec News，原文标题为:Cell to Chassis – (CTC) Space- and Weight-Saving Solutions and Fast Acceleration，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Littelfuse（力特）应用于汽车市场的电路保护器件选型指南

目录- Electrical Threats and New Automotive Technologies Introduction Automotive Applications in Modern Vehicles Circuit Protection device for Automotive Application Selection table Circuit Protection device for Automotive Application Selection Guide

型号- VXXE14AUTO,S8025XXXP,10EV,DST10XXXS-A,VXXE30AUTO,TPSMF4L,AXGD10603,501A,AQ3130,SM24CANB-02HTG,AQ05C,30KPA,LR4-XXXF,SRPXXXF,V30MLAXXXXNHAUTO,527 SERIES,AQ24CANFD,MICROASMD0XXF,AQ3400-02UTG,V18AUMLAXXXX,PICOASMDC0XXS,881A,AHRFXXX,AQ1003-01ETG,NANOASMDC0XXF,AQ24CANA-02HTG,885 SERIES,AQ2555NUTG,SZ1SM,LSP380,DST15XXS-A,V20HXXXAUTO,0438XXX.WRA,AQ3118,AQ24CANA,526 SERIES,VXXE25AUTO,FEMTOASMDC0XXF,MIDI70V,AHEFXXX,V20PXXXAUTO,DST5XXXS-A,P6SMB510CA,AQ15C-01FTG,20EV,AQ24CAN,SESD1004Q4UG-0020-090,AGRFXXX,AQ24CANFD-02HTG,TPSMA6L,0441XXX.WRA,0881XXXUR,440A,ASMDCXXXF,S8016NAXP,SZNS6A,SZ1SMB,SZ1SMC,AQ4022,AXGD10402,0440XXX.WRA,HS4040XAQX,TP5KP,V48MLAXXXXNHAUTO,AQ1005-01ETG,V24AUMLAXXXX,IXD_6XXSI,MINIASMDCXXXF,NG SERIES,V16AUMLA2220NS,P6KE510CA,441A,ASMDXXXF,SZ1.5SMC,VXXE17AUTO,V48AUMLAXXXX,437A,0437AXXX.WRA,V18MLAXXXXNHAUTO,AQ3045,SP3213,TP1.5KE,SZP6SMB,AQ3045-01ETG,SESD0402X1BN-0010-098,SP3012-04UTG,38EV,HCRTP-MINI,V16AUMLA2220H,TP6KE,438A,SLD8S,V120MLAXXXXNHAUTO,30EV,521 SERIES,V14HXXXAUTO,IX4340NE,V14PXXXAUTO,SZSMF,0HEV,SHEV,AHSXXX-2,AQ1005,0885XXXDR,SJ6025XXXP,TPSMC,V3.5MLAXXXXNHAUTO,TPSMB,TPSMD,0501XXX.WRA,AQ24C-01FTG,MEGA70V,VXXE45AUTO,SM24CANA-02HTG,DST8XXXS-A

选型指南 - LITTELFUSE - v0720 - 2020/9/2 PDF 英文下载

DIOTEC Schottky Diodes&Small Signal Diodes选型表

提供了Diotec肖特基二极管、小信号二极管选型，Maximum Average Forward Rectified Current IFAV[A]：0.02A-40A，Junction Temperature Tjmax[℃]：125-200℃

Repetitive Peak Reverse Voltage VRRM[V]

Maximum Average Forward Rectified Current IFAV[A]

Junction Temperature Tjmax[℃]

Forward Voltage VF[V]

Forward Voltage IF[A]

Peak Forward Surge Current IFSM[A]

Leakage Current IR[µA]

Leakage Current VR[V]

Junction Capacitance Cj[PF]

Junction Capacitance VR[V]

选型表 - DIOTEC 立即选型

BAS70, BAS70-04, BAS70-05, BAS70-06 SMD Small Signal Schottky Diodes

型号- BAS70-Q,BAS70-AQ,BAS70-06,BAS70-04,BAS70-05,BAS70-04-Q,BAS70-06-AQ,BAS70-05-Q,BAS70-06-Q,BAS70

数据手册 - DIOTEC - Version 2024-10-02 - 2024/10/4 PDF 英文下载查看更多版本

SRL23 High Current Schottky Diodes: Adopt Tiny PowerSOD-323/DO-219AD Package

The SRL23 is a high current Schottky diode in the tiny PowerSOD-323/DO-219AD package and measures 2.5 mm x 1.25 mm. It thus requires just 3.1 mm² on the printed circuit board.This device is optimized for high frequency and high power density applications. It features a repetitive reverse voltage of 30 V and nominal forward current rating of 2 A. Having smaller dimensions, low height profile and large cathode-sided leads these part enable the design engineers to increase power density and save space in compact electronics.

新产品发布时间 : 2020-11-29

Transition of Schottky Diodes to 3rd Generation Chip (-3G) Product Change Notification

型号- SK53,SK54-Q,SK54,SK84,SK52,SK84-3G,SK82,SK83,SK54-3G,SK54-3G-Q

产品变更通知及停产信息 - DIOTEC - 13.12.2018 PDF 英文下载查看更多版本

SIT30C065 Silicon Carbide Schottky Diodes

型号- SIT30C065

数据手册 - DIOTEC - Version 2024-09-10 - 2024/9/13 PDF 英文下载

LXMICRO‘s High-Power Schottky Diode MBR30100 Widely Used in Power, Adapter, Automotive Electronics and Consumer Electronics

LX MICRO‘s Schottky Diodes MBR30100 are used as high-frequency, low-voltage, high-current rectifying diodes, flyback diode, and protection diodes, or they can be used as rectifier diode and small signal detector diode in microwave communication circuit.

产品发布时间 : 2024-05-11