The Charging Interface is Unified, and the Connector Manufacturer Becomes the Biggest Winner
Previously, Ding Lei, a member of the CPPCC National Committee, recommended to the Ministry of industry and information technology to unify the standard port of smart electronic equipment charger to further reduce the carbon neutralization of e-waste. Recently, the Ministry of industry and information technology made a clear reply, saying that it would speed up the unification of charging interface and technology of electronic equipment. As soon as the news came out, it attracted extensive attention and discussion from the industry and consumers and even conducted a popular search on Weibo. It is worth mentioning that usb-c, as a recognized mainstream charging interface in the market, is expected to further accelerate the large-scale replacement of traditional charging interface with the help of the Ministry of industry and information technology. The market capacity will also increase significantly.
The Ministry of industry and information technology said in the document that with the rapid iteration of charging/data interface and charging technology, the smart terminal market has formed a pattern of coexistence of usb-c interface, various interfaces, and charging technology. After the user changes the equipment, most of the original chargers and data lines are idle, resulting in huge waste. Vigorously promoting the integration of charging interface and technology is conducive to reducing e-waste and improving resource utilization efficiency.
At the same time, the Ministry of industry and information technology also said that it would strengthen the formulation of charging technical specifications for terminal equipment, promote the integration and exchange of rapid charging technology, and promote the electronic recycling of waste electrical appliances. And share the next work route: continue to promote the formulation of relevant national standards, promote the unification of charging interface and technology, improve the recycling rate of electronic products, and strive to promote the high-quality development of the consumer electronics industry.
On May 28, 2021, the telecommunications terminal Industry Association issued the integrated fast charging standard, the technical specification for integrated fast charging of mobile terminals, referred to as ufcs, which is also the first general fast charging standard in China. It mainly solves the problems of complexity, variability, and incompatibility of market fast charging standards. The fast charging standard is based on the implementation of a usb-c interface.
Under the guidance of policies and standards, it is bound to promote the upgrading of many traditional power supply interfaces and accelerate the market popularization of usb-c interface; It may lead to a surge in market demand for the usb-c interface, and usb-c connector manufacturers will also usher in the golden age of delivery.
On the device side, the popularity of usb-c interface is very low in the product fields such as electric razor, electric toothbrush, facial cleanser, electric hand scissors, electric screwdriver, and so on.
Until recent years, some brands began to introduce usb-c charging interfaces into personal care products to improve the universality of products to chargers. This measure of the Ministry of industry and information technology will greatly promote the substitution of usb-c interfaces in traditional accessories, and the huge market base will also become the performance growth point of usb-c connector manufacturers.
At the same time, in the process of upgrading the charging interface of traditional electronic equipment, the demand for usb-c chargers and usb-c charging lines will inevitably increase. According to the standard calculation that each charger is equipped with at least one usb-c connector and each charging line is equipped with two usb-c connectors, the demand for usb-c connectors in the parts market is at least three times that of the demand. Usb-c connector manufacturers will be the biggest winners.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由耳神666转载自valnk Industry information,原文标题为:The charging interface is unified, and the connector manufacturer becomes the biggest winner,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
万连科技MC4光伏连接器助力光伏逆变器连接,电流涵盖30-60A,耐高低温且具有防水属性
新能源行业中的逆变器,主要应用在光伏和储能领域。其中光伏逆变器,是光伏发电系统主要部件之一,连接光伏方阵和电网,是确保光伏电站长期可靠运行的关键。光伏逆变器,则可控制蓄电池的充电和放电过程,进行交直流的变换。
原厂动态 发布时间 : 2023-05-07
万连科技电子谷新能源产品解决方案具备自主创新实力,帮助客户降本增效和产品设计能力赋能
电子谷是广东万连科技有限公司凝聚20年连接器研发、制造、服务经验打造而成,电子谷的新能源产品的解决方案具备了自主创新的实力,让每一位车主能够体验到新能源的长处,或在长途旅程中体验到舒适。
原厂动态 发布时间 : 2024-11-05
万连科技接插件产品选型表
万连科技推出接插件产品(连接器),包括端子、针座、胶壳,涵盖A2001、A1257、A1501、A1002、A2501、A1251、C3030、C4201等多个系列。 ①全系列产品外观是无LOGO设计,全系列针座电镀和线端端子电镀规格可全力配合生产。 ②外型紧凑,可减少系统尺寸和成本。 ③周身外壳具有强制锁定结构,可确保连接器完全插配,避免意外拔出。 ④承载电流大,最高可达15A,可以广泛满足消费电子、汽车、工业等多个领域的需求。
产品型号
|
品类
|
材质属性
|
间距(mm)
|
额定电流(A)
|
接插电阻(mΩ)
|
绝缘电阻(MΩ)
|
PIN位
|
描述
|
A2001HM-102S2
|
胶壳
|
PA66,UL94V-0
|
2.0mm
|
2A
|
20mΩ max
|
1000MΩ min
|
2Pin
|
Pitch2.00mm PH单排 Housing 2pin 无卤 本色
|
选型表 - 万连科技 立即选型
【应用】万连科技推出关节机器人连接器解决方案,产品具有抗震动、抗冲击优势,满足有限空间内的需求
关节机器人是工业机器人最为常见的形态之一,适用于工业领域的机械自动化作业,其特点是灵活动作,因此关节机器人在结构上需要驱动部件及传感元件小型轻巧,手臂结构紧凑。针对关节机器人的应用,电子谷为其提供一些系列适用连接器产品,产品具备抗震动,抗冲击等优势,适合在有限空间适用。
应用方案 发布时间 : 2023-04-22
万连科技M12 A编码组装式圆形连接器,凭其高防护等级、可靠性强等特点,实现稳定的电源连接和信号传输
M12 A编码圆形连接器作为工业领域中常见的一种连接器,它属于IEC61076-2-101标准下的M12系列连接器。这种连接器通过公母螺纹耦合连接,使插座与插头,或者插头与插头相向运动,相互锁紧,从而实现两个连接器多芯导线连接互通,传输信号、数据或电源,在自动化设备、传感器、执行器等工业应用中得到了广泛应用。
产品 发布时间 : 2024-11-02
万连科技(valnk)圆形连接器选型指南
描述- 广东万连科技有限公司成立于2020年,作为业界领先的连接方案提供商,万连拥有卓越的研发实力、丰富的连接器产品线以及严格的品质管理系统,专业致力于为中国制造业发展提供广泛适用性的连接器产品与技术导向型的国产方案服务。
型号- 7/8,M16,M5,M623,M8,M9,M923,M12,M23
【元件】万连科技推出抗压防水、阻燃耐温的DP系列圆形航空插头,多芯配置,防水等级可达IP68
万连科技推出抗压防水、阻燃耐温的DP系列圆形航空插头。DP系列对接型圆形连接器其稳固螺旋锁定装置,密封性能良好,即使面对恶劣的户外天气环境也能保持良好的防水性能,产品在连接状态下可达到1P68防护等级。从而让您的工业设备保障正常运行而不受影响。
产品 发布时间 : 2023-12-09
万连科技A1251系列接插件连接器采用两点接触式设计,确保工业自动化设备电气连接的正常工作
A1251系列是万连科技1.25mm间距线对板连接器,全系列采用紧凑型结构,有效节省空间。采用摩擦锁以实现牢固插配;部分镀金型号可在极端条件下提高可靠性和耐用性。
应用方案 发布时间 : 2024-10-24
万连科技圆形连接器选型表
万连科技提供以下技术参数的圆形连接器的选型,型式:Male/Female,端接类型:焊接式/焊线成型式/焊线式/面板式/装配式,PIN数:2Pin~26Pin,安装方式:面板连接用/电缆连接用,额定电流:1A~25A,额定电压:400V/500V,耐电压:1200V/1500V,接触电阻:0.5/1/2.5/5,线规:0.75mm²~25mm²
产品型号
|
品类
|
描述
|
型式
|
端接类型
|
pin数
|
接触直径(mm)
|
接插方式
|
安装方式
|
额定电流(A)
|
额定电压(V)
|
耐电压(V)
|
接触电阻(mΩ)
|
绝缘电阻(MΩ)
|
插拔次数
|
工作温度
|
线规(mm²)
|
WWS20J12Z
|
圆形连接器
|
航空插头 WS20系列 12芯公头 面板安装插座 带方形法兰
|
Male
|
焊接式
|
12Pin
|
ø1×12
|
螺纹连接
|
面板连接用
|
5A
|
500V
|
1500V
|
5mΩ Max
|
2000MΩ Min
|
≥500
|
-40℃~+85℃
|
0.75mm²
|
选型表 - 万连科技 立即选型
万连科技ES01系列矩形浮动盲插连接器助力叠堆储能电池连接,消除公差,同时实现电源和信号传输
堆叠式储能电池连接应用——万连科技ES01系列矩形浮动盲插连接器,复合性设计,同时实现电源和信号传输,使得电路接线更加整洁美观;通过浮动盲插的设计,消除公差,避免组装出现错位,从而实现电气性能的稳定性。
应用方案 发布时间 : 2024-01-27
万连科技推出M12航插连接器与线束定制,为您的自动化设备提供专业互连支持
万连科技推出M12航插连接器和线束的定制服务,为您的自动化设备提供精准的互连解决方案。M12航插连接器,以其螺纹锁紧设计、紧凑结构、出色的抗振、抗冲击和抗干扰能力,以及快速的连接与断开特性,使其成为恶劣工业环境(如高振动、尘埃、潮湿等)的理想选择。
产品 发布时间 : 2024-10-12
万连科技POGOPIN连接器:小米等品牌的选择,以寿命长、防水防潮等优点得到客户的肯定
电子谷专注连接器行业,在POGOPIN产品应用上,小米亦是选择电子谷,小米是一家专注于做高端智能手机、互联网电视以及智能家居生态链建设的创新型科技企业,在小米的产品中,十分多的采用了POGOPIN产品,POGOPIN产品自身的优势使得产品工程师能够很好地解决产品内的连接问题。在结构空间使用、组装成本、寿命、样品周期及成本等方面都能很好地体现出优势。
原厂动态 发布时间 : 2024-09-20
万连科技授权世强硬创全线代理,聚焦完整、高效的连接器产品
万连科技专注于接插件连接器,其中包含FPC、线对板连接器、线对线连接器、排针排母,接线端子及工业连接器等设计研发,产品已覆盖工业工控、汽车新能源、消费电子以及5G、医疗等多个领域。
公司动态 发布时间 : 2023-03-29
万连科技A2001系列A2001F9-1022CM2连接器满足wifi智能互联网指纹锁的设计需求
在产品竞争激烈的现在,产品小型化和价格亲民化已成为趋势,在客户方案中的wifi智能互联网指纹锁在产品设计时需选用小型器件,满足外观小巧的需求,在设计方案时选择电子谷的A2001系列2PIN卧贴针座及线端。
应用方案 发布时间 : 2024-10-10
电子商城
登录 | 立即注册
提交评论