ROHM Introduces New BD77502FVM 2-Channel High-Speed Ground Sense CMOS Op Amp

时间： 2021-01-03 来源：ROHM

技术问答

ROHM introduces the availability of a 2 channel high-speed ground sense CMOS op amp(operational amplifier), BD77502FVM, optimized for consumer and industrial equipment requiring high-speed sensing – such as industrial measurement and control systems.

The proliferation of the Internet of Things (IoT) in recent years has led to a significant increase in the number of electronic components used for advanced control in a variety of applications. This trend towards greater electronics density is leading to noisier environments, making it extremely difficult to implement designs with electromagnetic compatibility (EMC). Op amps play a critical point role because they quickly amplify small signals (from sensors) in many detection systems that provide safety. In addition, printed circuit board design can also be problematic for conventional op amps that are susceptible to oscillation due to capacitive loads (i.e. from wiring).

To mitigate noise issues common with conventional op amps, ROHM has developed the EMARMOUR™ series featuring superior noise tolerant op amps. The first groundbreaking member of the EMARMOUR family was the BD77501G single channel high-speed CMOS op amp that leveraged the original Nano Cap™ technology to prevent oscillation caused by load capacitance. This product has been well-received by many engineers in a variety of fields and regions, and ROHM's latest 2 channel version was developed to meet increasing market demands.

The newest BD77502FVM integrates two op amp devices that prevent oscillation (i.e. due to wiring) while providing high-speed amplification with slew rates up to 10V/µs and breakthrough immunity to electromagnetic interference (EMI). The output voltage across the entire noise frequency band is limited to under ±20mV, which is 10x lower than a conventional op amp. High-speed signal amplification is now achievable without being affected by external noise or load capacitance when used in devices that output small signals such as sensors, thus improving reliability while simplifying circuit designs.

<What is EMARMOUR™?>

EMARMOUR™ is ROHM's unique brand to identify its products that leverage proprietary technologies covering layout, processes, and circuit design to achieve ultra-high noise immunity. This technology limits output voltage fluctuation to less than ±300mV across the entire noise frequency band during noise evaluation testing under the international ISO11452-2 standard. This unprecedented noise immunity reduces design resources while improving reliability by solving issues related to noise in the development of a variety of systems.

<Key Features>

The BD77502FVM, which expands the EMARMOUR™ lineup that delivers unmatched noise tolerance, builds upon the 1ch ground sense CMOS op amp BD77501G widely adopted in the industrial equipment market by offering high-speed operation and preventing oscillation due to load capacitance. And in addition to the following features, the 2ch design supports market demands for more compact board designs.

1. No oscillation and high-speed op amps that minimizes design time related to load capacitance

Original Nano Cap™ power supply technology is used to achieve extremely stable control, making it possible to completely eliminate oscillation caused by load capacitance (i.e. due to wiring) while supporting high-speed amplification (high slew rate: 10V/µs) required in anomaly detection and other systems. Unlike standard op amps that can be difficult to use due to restrictions imposed on the wiring and peripheral components resulting from instability caused by load capacitance, ROHM's new op amp prevents oscillation to ensure stable operation and facilitate application design.

2. Superior noise immunity facilitates noise design requirements (EMARMOUR™ exclusive)

Whereas the output voltage of conventional products can fluctuate by ±200mV or more across the entire noise frequency band, ROHM's latest EMARMOUR™ series op amp achieves unprecedented noise immunity that limits variation to less than ±20mV. This eliminates the need for countermeasures (filter circuits) for each noise frequency, reducing the noise design resources for sensors (which play an important role in a variety of systems) while improving system reliability.

3. Eliminates 16 parts required for noise suppression (EMARMOUR™ exclusive)

The BD77502FVM provides superior noise immunity that eliminates the need for external noise countermeasure components conventionally required for standard products (i.e. RC filters for the power supply, input, and output pins). For example, in the case of a 2ch op amp, ROHM's new product uses 16 fewer external components than conventional solutions.

<Application Examples>

· Facility management equipment such as abnormal current and gas detectors

· Motors requiring high-speed control (signal transmission)

· Inverter control equipment

· Pre-drive buffers for driving transistors

· other industrial and consumer applications requiring high-speed signal transmission and amplification without worrying about load capacitance.

<EMARMOUR™ CMOS Op Amp Lineup>

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由宝丁转载自ROHM，原文标题为:New EMARMOUR™ 2 Channel High-Speed Op Amp，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

【产品】ROHM开发出双通道高速CMOS运算放大器BD77502FVM，抗噪声性能出色

全球知名半导体制造商ROHM开发出一款双通道高速接地检测CMOS运算放大器*1“BD77502FVM”，非常适用于计量设备、控制设备中使用的异常检测系统以及处理微小信号的各种传感器等需要高速感测的工业设备和消费电子设备，抗噪声性能出色。

新产品发布时间 : 2020-10-13

ROHM高性能运算放大器选型表

高性能CMOS运算放大器具有低噪声、低输入失调电压、低输入偏置电流和高速度的特点，适用于用电池供电的设备和使用放大器的传感器。

Power supply (Min.) [V] (+5V=5, +/-5V=10)

Power supply (Max.) [V] (+5V=5, +/-5V=10)

Input Voltage Range [V]

Output Voltage Range [V]

Circuit Current (Typ.) [mA/ch]

Input Offset Voltage (Max.) [mV]

Input Bias Current (Typ.) [nA]

Slew Rate (Typ.) [V/µs]

Equivalent input noise voltage (Typ.) [nV/√Hz]

GBW (Typ.) [MHz]

Series

Temperature (Min.)[°C]

Temperature (Max.)[°C]

Rail-to-Rail Input/Output

2.5

5.5

VSS to VDD

VSS+0.010 to VDD-0.010

AEC-Q100 (Automotive Grade)

选型表 - ROHM 立即选型

ROHM Develops a New Op Amp that Minimizes Current Consumption, Improving Power Savings in Consumer and Industrial Equipment

ROHM has developed a linear operational amplifier- LMR1901YG-M - featuring the lowest current consumption in the industry. The LMR1901YG-M leverages original ultra-low power technology that thoroughly suppresses current increase caused by temperature and voltage changes to reduce current consumption to just 160nA (Typ.) - approximately 38% lower than that of general low power op amps.

产品发布时间 : 2024-04-12

ROHM Develops the Industry‘s Smallest* CMOS Op Amp Optimized for Smartphones and Compact IoT Devices

ROHM has developed an ultra-compact 1.8V - 5V, rail-to-rail CMOS operational amplifier (op amp) - the TLR377GYZ. It is optimized for amplifying signals from sensors such as temperature, pressure, flow rate, used in smartphones, small IoT devices, and similar applications.

产品发布时间 : 2024-08-22

LMR1002F-LB Zero Drift Low Offset Voltage Rail-to-Rail input/output CMOS Operational Amplifier Datasheet

型号- LMR1002F-LBΕ2,LMR1002F-LB

数据手册 - ROHM - Rev.001 - 11.Sep.2023 PDF 英文下载

LM4565xxx Operational Amplifiers Low Noise Operational Amplifier Datasheet

型号- LM4565XXX,LM4565FVM-TR,LM4565XXX-XX,LM4565FVJ-E2,LM4565FJ-E2,LM4565FVT-E2,LM4565FV-E2,LM4565F-E2

数据手册 - ROHM - Rev.004 - 08.May.2024 PDF 英文下载

ROHM Develops the Industry‘s Smallest CMOS Op Amp Optimized for Smartphones and Compact IoT Devices

ROHM has developed an ultra-compact 1.8V - 5V, rail-to-rail CMOS operational amplifier - the TLR377GYZ. It is optimized for amplifying signals from sensors such as temperature, pressure, flow rate, used in smartphones, small IoT devices, and similar applications.

产品发布时间 : 2024-08-03

BD87581YG-C EMARMOUR™ Automotive Excellent EMI Characteristics Input/Output Rail-to-Rail CMOS Operational Amplifier Datasheet

型号- BD87581YG-C,BD87581YG-CTR

数据手册 - ROHM - Rev.001 - 15.Nov.2019 PDF 英文下载

BA4580RFVM Footprint / Symbol

型号- BA4580RFVM,BA4580RFVM-TR

CAD模型库 - ROHM - 2023/11/23 ZIP 英文下载

Operational Amplifiers Low Noise Operational Amplifier LM4559xxx

型号- LM4559,LM4559F-E2,LM4559FVM-TR,LM4559FVT-E2,LM4559FVJ-E2,LM4559FV,LM4559FVM,LM4559FJ,LM4559FVJ,LM4559XXX,LM4559F,LM4559FV-E2,LM4559FVT,LM4559FJ-E2

数据手册 - ROHM - Rev.003 - 04.Dec.2013 PDF 英文下载

Low Noise, Low Input Offset Voltage CMOS Operational Amplifiers(Op Amps) Non-inverting Amplifier–DC Sweep simulation

型号- LMR1802G-LB

用户指南 - ROHM - Rev.001 - NOVEMBER 2021 PDF 英文下载

ROHM（罗姆）运算放大器选型指南（英文）

描述- ROHM has succeeded in commercializing high performance Op Amps that exceed the limits of existing noise performance by leveraging integrated manufacturing and reviewing not only circuit design but also layout, processes, and element variations.

型号- BD87584YFV-C,BA82902YF-C,BD7282YFJ-C,BA82904YFVM-C,BD87582YFVM-C,TLR2377YFVM-C,BA82902YFV-C,TLR2376YFJ-C,LM2902EYF-C,BA83474YF-C,TLR377YG-C,BA82903YF-C,LM2902EYFV-C,TLR4377YF-C,TLR4377YFV-C,TLR2377YF-C,TLR376YG-C,BD77501G,BD7282YFVM-C,BA83472YF-C,BA83474YFV-C,BD77504FV,BD7284YFV-C,BA82901YFV-C,BD8758XY,BA83472YFVM-C,LM2901EYF-C,LM2904EYF-C,BA82904YF-C,LM2904EYFJ-C,LM2904EYFVM-C,LM2901EYFV-C,BD77502FVM,BA82903YFVM-C,LM2903EYFVM-C,LMR1802YG-C,BA82901YF-C,BD87581YG-C,LM2903EYF-C,BD7281YG-C,TLR4376YFV-C,TLR2376YFVM-C,LMR1802G-LB,TLR2377YFJ-C

选型指南 - ROHM - 01.2022 PDF 英文下载

Operational Amplifier series Low Noise Operational Amplifiers BA14741F, BA14741FJ

型号- BA14741F-E2,BA14741F,BA14741,BA14741FJ-E2,BA14741F -E2,BA14741FJ,BA14741XX,BA14741XX-E2

数据手册 - ROHM - Rev.001 - 9.NOV.2012 PDF 英文下载

ROHM‘s New Zero-Drift Op Amp with High Accuracy Regardless of Temperature Changes, Offering 9µV Input Offset Voltage

ROHM has developed a zero-drift operational amplifier (op amp) - the LMR1002F-LB. It is designed for industrial and consumer electronics devices and minimizes both input offset voltage and input offset voltage temperature drift.

产品发布时间 : 2024-02-08