1个回答
-
![]()
- 用户_5489 (0)
- the sprintf function executes the floating point type conversion processing, which results in increase of size.
If the floating point type conversion is not executed, add the dummy function _ldtob() to C source as shown below to compress the code size.
example)
#include
char buf[32];
void main(void)
{
sprintf(buf, "test");
}
void _Ldtob(void *p, char code){} // Dummy function for code size reduction
Related Products: ml610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ml610q10x, ml610q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ml610q41x, ml610q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ml620q503h/ml620q504h/ml620q506H, ml62q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx - 创建于2024-07-01
- |
- +1 赞 0
- 收藏
平台合作
相关推荐
What are the benefits of using liquid instead of air cooling systems?
Liquid heat exchangers can reduce the thermal resistance of conventional heat sink fan dissipation mechanisms by a factor of 10 or more, which makes it much more efficient. This is due to the poor thermal properties of air versus coolants such as water. Liquid cooling systems have a more rapid cool down time, which means less time to reach the desired temperature. While conventional air cooling systems push air all around the system, and can potentially add heat from surrounding hot electronics, liquid cooling systems are equipped with a heat exchanger that routes heat away through a liquid circuit. Air-cooling systems in the higher capacity range often require larger fans, which can increase noise as well as the size of the system.
Why does my function generator amplitude not match the set point?
The most likely cause is that the generator output is not configured with the correct value that matches the actual load.
What is the largest size thermoelectric cooler that LTS provides?
Laird Thermal Systems' largest thermoelectric module is the UltraTEC™ UTX Series, 55 x 55 x 3.9 mm (LxWxH).
How does Walmate ensure the quality of my parts?
Walmate takes a proactive approach to customer’s quality concerns from the initial communication, providing cost-effective and rationalized advice from designs, materials, production processes, manufacturability, etc. Once your order is confirmed, we will perform a full Design for Manufacturing (DFM) review to point out any issues that our engineers feel may affect the quality of your parts. We have the ability to share inspection data with you in real-time so we can work together to address any quality issues you may have during production. All incoming materials will meet your design specifications. Final inspection reports before shipment.
What is the maximum ambient temperature that Thermoelectric coolers or assemblies can operate in?
The maximum operating temperature of standard thermoelectric coolers is 80⁰C. For higher temperatures, our HiTemp ETX Series thermoelectric cooler offer cooling for applications with ambient temperatures up to 150°C. For thermoelectric cooler assemblies, the Outdoor Cooler Series has the widest capacity range with an operational capacity from -40°C to +55°C ambient. The SuperCool Series thermoelectric cooler assembly can withstand the highest temperature of 60°C.
For BD37033FV-M,BD37034FV-M,BD37524FS,BD37534FV,BD37543FS, What is the level meter function?
The Level Meter is a circuit that outputs a DC voltage proportional to the magnitude of the signal and holds the peak level of the detected signal. Since the held peak level can be reset by resetting the Level Meter, the transition of the peak level can be monitored by periodically performing a reset. The reset interval should be at least one cycle of the frequency to be monitored.
There is the silence insertion function on edit ROM function. Do we need to prepare the individual "silent" phrase?
The individual "silent" phrase is not necessary. The silent data ROM size can be reduced using the silence insertion function. Related Products: ML22420/460, ML22530/Q53x, ML2256x/Q563, ML2257x/Q573, ML22594, ML22660/Q66x, ML2272x/76x, ML2282x/86x, ML22Q374/Q394, ML22Q553
How can I call a C function from the startup routine?
Use BL instruction to call a C function from the startup routine. Put an underscore (_) at the beginning of a C function name to call. The following shows an example. Example: BL _sub
What do small and large models mean?
Small model and large model are the names of memory models. The small model is for products with a program memory ROM size of 64 Kbytes or less, and the large model is for products with a program memory ROM size of more than 64 Kbytes. In the large model, the number of registers saved on the stack by interrupts, PUSH / POP instructions, etc. increases, so the execution cycle increases. For details on the memory model, refer to "nX-U16 / 100 Core Instruction Manual" P1-20 1.3.6 Memory Model. Related Products: ML610(Q)40x, ML610(Q)42x, ML610(Q)47x, ML610(Q)48x, ML610Q10x, ML610Q11x, ML610Q17x, ML610Q30x, ML610Q35x, ML610Q36x, ML610Q38x, ML610Q41x, ML610Q43x, ML610Q46x, ML620Q13x, ML620Q15x, ML620Q416/ML620Q418, ML620Q503H/ML620Q504H/ML620Q506H, ML62Q12xx, ML62Q13xx, ML62Q14xx, ML62Q15xx/ML62Q18xx, ML62Q16xx, ML62Q17xx
Is it possible to use I2S output (master) on the ML22Q53X?
Since the SAI interface (I2S) of the ML22Q53X is a slave, I2S output (master) is not possible. Related Products: ML22530/Q53x, ML22660/Q66x
For Analog Audio Processors, For products with VOL and FADER, how can I use them to reduce output noise?
To reduce the output noise level, decrease the gain of the FADER in the second stage instead of the VOL in the first stage.
Does the A/D converter include a sample/hold circuit? Or, does a hold occur for the number of input ports?
The ADC of our microcontroller includes a sample/hold circuit. Note that the sample/hold circuits for the number of input ports are not provided.
What is the size of sample program code?
Sample code size for ML5236 is 23KB, ML5238 is 26KB. For ML5236, data ROM of 2.3KB is used for parameter and log storage.
Please describe the speed and pitch control function.
The speed control function can changes the speed only keeping the voice quality. The pitch control function can changes the pitch only keeping the speed and voice quality. Therefore, the speed and pitch function can be changed without damaging the original sound quality. Related Products: ML2272x/76x
电子商城
现货市场
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问